Enter a Name and select the lineup Type. SnapStream supports Analog, ATSC (digital antenna), QAM (digital over RF cable), DVB-T, and IPTV lineups.
Click Create.
You will return to the main Lineups page and see a new Local Lineup with 0 channels.
Click the Edit button to change the channel mapping of your new lineup.
To add a new channel, enter a Channel, Name,Callsign and Affiliation and click Add.
To change the Channel, Name, Callsign or Affiliation of an existing channel, click Edit.
When you are done, click Return.
Channel Mapping in Digital Lineups
Channel mapping differs between the three types of digital lineups. The correct settings for your channels should be available from your cable provider.
ATSC
For an ATSC channel, the Major Channel and the Minor Channel are logical tuning information for receiving the specific program after the physical channel is recorded. The Physical Channel determines the frequency of the channel.
QAM
When setting up a QAM channel, the QAM Type andPhysical Channel determine the frequency of the channel. The Program Number is used to differentiate between multiple streams that are part of a single physical channel. The Guide Channel is an arbitrary setting that determines only where the channel will appear in the Program Guide.
DVB-T
For DVB-T, the Carrier Frequency specifies where the channel is on the signal, specified in kilohertz. For example, 567.000MHZ should be entered as "567000."
Bandwidth is also in KHZ and is defined by the TV provider. This number is usually in the range of 6-8mhz, which would be entered as 6000-8000.
The Program Number is used to differentiate between multiple streams that are part of a single physical channel.
The Guide Channel is an arbitrary setting that determines only where the channel will appear in the Program Guide.
IPTV
For IPTV, the IP Address or DNS Name designates the source of the channel, along with the Port. For some cases, the Source Address may specify the source of the stream.
The Transport Type is used to select different types of IPTV. The Program Number is used to differentiate between multiple streams that are part of a single physical channel.
The Guide Channel is an arbitrary setting that determines only where the channel will appear in the Program Guide.
